Eot crane Brakes

Electro Hydraulic Thruster

Approx Price: Rs 6,600 / Piece 
We are leading manufacturer & Exporter of Electro Hydraulic Thruster.We are manufacturer of wide range of electro hydraulic thruster. Electro hydraulic Thruster is a device which develops linear thrust required to operate the required mechanism. The input to the device is three phase supply.

The thrusters are widely used to actuate thruster shoe brakes, commonly used in material handling machines & equipments. Thruster in various models available 15 Kg to 295 Kg. in stroke lengths of 51,76 & 127 mm.

Thruster Brakes

Approx Price: Rs 6,500 / Piece 
CMK Electro Power Pvt Ltd is the leading manufacturer of Electro hydraulic Thruster Brake. Our mill duty Thruster Brakes are suitable for 400/440 Volts, 3 Phase A.C. supply for a wide range of drum sizes, from 100mm to 600 mm dia. Higher sizes can also be supplied against specific requirements. The brake is applied by the tension of the compressed springs mounted vertically between the thruster and brake lever. The thruster rods are connected with the brake by means of an angle lever. As the piston travels upwards the angle lever turns, pushes the brake rod and compresses the brake spring. Simultaneously, the brake lever on the other side of the wheel (Brake Drum) is retracted.

The brake lever at the thruster begins to move when the first lever reaches the stop on the brake base member The thruster and the brake are so adjusted as to reserve about 1/3 of the stroke for compensation of the wear of the brake linings.

Thruster brakes are suitable for:

  • 400 /440volts, 3 Phase, 50 Hz A.C.
  • Supply Brake Drum Diameter-100-600 MM
  • Braking torque – 6Kg.M. – 580 Kg.M.
  • Easy installation & maintenance
  • Reverse action version available
  • Self adjusting lining wear mechanism
  • Hydraulic / pneumatic actuator
  • Gentle action, simple control, high performance.

AC Solenoid Brake

Approx Price: Rs 7,500 / Piece 

We are leading manufacturer of AC Solenoid Brake that are suitable for AC supply up to 400 to 440 volts, and are available for a wide range of drum sizes from 100 mm to 380mm Dia. We stand in the midst of prominent electromagnetic brakes suppliers based in India.

Since these brakes are in normally closed position, the release of the Brake shoes is affected by energizing the electro magnetic coil, which overcomes the spring force and the shoes are moved clear off the drum by lever/arm linkage system so that the drum is free to rotate without any friction. When the power in given to the Electro Magnetic coil the coil gets energized and in turn pulls the plunger down.

The plunger in turn operates the arm of the brakes and the brake opens. The design of the brake is such that as the lining keeps wearing out due to normal operation of the brake, adjusts itself on its own to achieve the rated toque. When specified, brake drum or drum coupling both pin bush type and flexible geared type can be supplied along with the brakes.

 

 

    Crane Brake

    Approx Price: Rs 8,000 / Piece 
    CMK Electro Power Pvt Ltd is the leading manufacturer of Crane Brakes. Electro hydraulic Thruster Brake. Magnetic brake,Shoe Brake,Solenoid brake etc. Our mill duty Thruster Brakes are suitable for 400/440 Volts, 3 Phase A.C. supply for a wide range of drum sizes, from 100mm to 600 mm dia. Higher sizes can also be supplied against specific requirements.

    The brake is applied by the tension of the compressed springs mounted vertically between the thruster and brake lever. The thruster rods are connected with the brake by means of an angle lever. As the piston travels upwards the angle lever turns, pushes the brake rod and compresses the brake spring. Simultaneously, the brake lever on the other side of the wheel (Brake Drum) is retracted. The brake lever at the thruster begins to move when the first lever reaches the stop on the brake base member The thruster and the brake are so adjusted as to reserve about 1/3 of the stroke for compensation of the wear of the brake linings.

    Crane Hoist Brake

    Approx Price: Rs 10,000 / Piece 
    We are leading manufacturer of AC Solenoid Brake that are suitable for AC supply up to 400 to 440 volts, and are available for a wide range of drum sizes from 100 mm to 380mm Dia. We stand in the midst of prominent electromagnetic brakes suppliers based in India.

    Since these brakes are in normally closed position, the release of the Brake shoes is affected by energizing the electro magnetic coil, which overcomes the spring force and the shoes are moved clear off the drum by lever/arm linkage system so that the drum is free to rotate without any friction. When the power in given to the Electro Magnetic coil the coil gets energized and in turn pulls the plunger down.

    The plunger in turn operates the arm of the brakes and the brake opens. The design of the brake is such that as the lining keeps wearing out due to normal operation of the brake, adjusts itself on its own to achieve the rated toque. When specified, brake drum or drum coupling both pin bush type and flexible geared type can be supplied along with the brakes.

    Thrustor Brake

    Approx Price: Rs 9,500 / Piece 
    We are Leading Manufacturer & exporter of Electro hydraulic Thruster Brake. Thruster Brakes is a device used to retard the speed of moving machinery and to stop it accurately to the desired position. The braking force is applied to the brake shoes by a per-stressed comprising spring. The shoes press on the rotating brake drum retarding its speed and finally stop it. The releasing of the brake drum and compressing of the spring is done by thruster.

    Thruster brakes are suitable for 400 /440volts.

    • 3 Phase, 50 Hz A.C. Supply. Brake Drum Diameter-100-600 MM.
    • Braking torque - 6Kg.M. - 580 Kg.M.
    • Easy installation & maintenance
    • Reverse action version available
    • Self adjusting lining wear mechanism.
    • Hydraulic / pneumatic actuator.
    • Gentle action, simple control, high performance.

    Industrial Thruster Brake

    Approx Price: Rs 8,000 / Piece 

    We are Leading Manufacturer & Exporter of Industrial Brake. Thruster Brakes is a device used to retard the speed of moving machinery and to stop it accurately to the desired position. The braking force is applied to the brake shoes by a per-stressed comprising spring. The shoes press on the rotating brake drum retarding its speed and finally stop it. The releasing of the brake drum and compressing of the spring is done by thruster.

    We are manufacturer of superior quality range of AC and DC Fail Safe Brake. We regularly interact with the customers and ensure that their needs are fulfilled in the way they desire. Normally liner plate is gripped between two discs with the help of spring pressure. Our A.C & D.C. fail safe disc brakes are manufactured to International standards and are with high operating frequency & reliability.

    We are leading manufacturer of AC Solenoid Brake that are suitable for AC supply up to 400 to 440 volts and are available for a wide range of drum sizes from 100 mm to 380mm Dia. We stand in the midst of prominent electromagnetic brakes suppliers based in India.

    Electromagnetic Brake

    Approx Price: Rs 4,000 / Piece 
    Our company is well known for the manufacturing and exporting of Electromagnetic Brake. These Electromagnetic Brake are making using high quality raw material, which is sourced from trustworthy vendors of the market.

    • Offering Shoe Brake, Solenoid Brake, Drum Brake. We make Electro-magnetic, AC / DC Solenoid operated Shoe Type, Spring loaded, fail safe Brake.
    • Working Voltage for AC Brake: 415 V AC, 2 Phase, 50 Hz.
    • Standard working Voltages for DC Brake: 24, 110, 190, 220 V DC.
    • Suitable for drum diameter: 100, 150, 200, 250, 300, 400, 500 mm.
    • Available with: Brake Drum, flexible brake drum coupling, geared coupling, geared brake drum coupling.
    • Applications: Cranes, Lifts, Conveyors, Winches, Hoists, Material Handling Equipments, Dam Gates etc.

    AC Electro Magnetic Brake

    Approx Price: Rs 2,800 / Piece 
    We are leading manufacturer & Exporter of Brake Drum Gear Coupling in India. Our Brake drums & Gear Coupling are made from premium quality materials which offer strength and durability to them.

    These brake drums are specially designed and guarantees dimensional accuracy which is inevitable for precise operations.
      Looking for Eot crane Brakes ?
      © Cmk Electropower Pvt Ltd
       
      Desktop Site Back to top